32056X Bearing 280x420x87mm

Ship Weight:5.62 LB; Material Type:CARBON STEEL; Take-Up Frame Travel:3.0000 in; Screw Treatment:ZINC PLATED; Special Coating:STANDARD PAINT; Brand:Baldor-Dodge; Take-Up Frame Style:WIDE SLOT; Screw Diameter:0.6250 in; Frame Size:300; UPC:782475583874;

Designation of bearing:ES205G2; Weight:0.59 kg; C:14 kN; H2:70 mm; E:12.5 mm; B:21.4 mm; N:M10; L:70 mm; B1:30.9 mm; Recommended tightening torque for set screw:5.5 Nm;

S:31 mm; B2:23.9 mm; T min.:-20 °C; m:9 mm; T max.:100 °C; C:36 mm; Recommended tightening torque for set screw:16.8 Nm; B1:79.4 mm; r:2; d:61.91 mm;

C:171.6 kN; H:440 mm; Recommended tightening torque for set screw:65.2 Nm; s1:86.5 mm; A2:137.6 mm; G:M10x1; S:50 mm; N:44mm; Designation of bearing:EX320-64G2T20; Weight:27.75 kg;

N1:19 mm; H:33.3 mm; d1:32.4 mm; A:38 mm; B:34 mm; Designation of bearing:EX204G2L3; N:13mm; Recommended tightening torque for set screw:5.5 Nm; H1:15 mm; G:M6x1;

T min.:-20 °C; A:38 mm; H:36.5 mm; Designation of open end cover:SCO205-25; s1:13.5 mm; d:25 mm; N:M10; A1:25 mm; S:7.5 mm; H1:15 mm;

Weight:5.59 kg; N:18mm; C:72.5 kN; s1:41.3 mm; G:R1/8"; d:80.96 mm; Designation of housing:FCE216-; S:33.3 mm; Recommended tightening torque for set screw:27.1 Nm; J:184 mm;

S:19 mm; C0:23.2 kN; A1:14.3 mm; T min.:-20 °C; A:39.7 mm; J:111 mm; s1:25.8 mm; Designation of bearing:UCX09G2; T max.:100 °C; G:R1/8";

N1:19 mm; L:127 mm; C0:6.65 kN; s1:30.5 mm; H:33.3 mm; H2:65 mm; N:13mm; A1:22 mm; J:95 mm; T min.:-20 °C;

N:14mm; Recommended tightening torque for set screw:8 Nm; A1:30.5 mm; A:44.5 mm; L:166 mm; S:17.5 mm; C0:15.2 kN; G:M6x1; J:129 mm; H2:91.5 mm;

Maximum Capacity / Filling Slot:No; Brand:NTN; Minimum Buy Quantity:N/A; UNSPSC:31171504; Other Features:Deep Groove | Cartri; Mass:0.37 kg; Characteristic cage frequency, FTF:0.4 Hz; Category:Single Row Ball Bear; Inner Race Width:0 Inch | 0 Millimete; Weight / Kilogram:0.603;

Characteristic cage frequency, FTF:0.39 Hz; d:17 mm; ra max:0.3 mm; Fatigue limit load, Cu:0.15 kN; Da max:33 mm; f0:13.6; Dynamic load, C:6.8 kN; Brand:NTN; da min:19 mm; Mass:0.04 kg;

H2:83 mm; Weight:2.55 kg; s1:33.4 mm; B1:43.7 mm; T min.:-20 °C; H1:102 mm; Designation of bearing:ES210-30G2T20; A:49 mm; Recommended tightening torque for set screw:8 Nm; L:149 mm;

B:21.4 mm; S:7.5 mm; d1:37.4 mm; T min.:-40 °C; A4:21 mm; L:115 mm; A:27 mm; A2:33.4 mm; s1:24.2 mm; T max.:100 °C;

Weight / LBS:27.337; Inner Race Width:0 Inch | 0 Millimete; Nlim (oil):3,100 rpm; Other Features:Deep Groove; Manufacturer Name:NTN; Static load, C0:185 kN; Outside Diameter:10.236 Inch | 260 Mi; Internal Clearance:C3-Loose; Radial clearance class:C3; Characteristic inner ring frequency, BPFI:4.87 H